| Product Name and (Model) | MediaDice® SSD DISINTEGRATOR-2C (MDS-2C) |
| Dimensions | 45.3″ (115 cm) Wide (front left to right) 37.8″ (95 cm) Deep (front to the back of the machine) 50″ High (127 cm) Height (floor to top of the machine) |
| Weight (excludes packing and crating) | 1250 lbs. (567 kg) |
| Shipping Weight (includes packing, crating, and pallet) | 1,500 lbs. (680 kg) |
| Shipping Dimensions | 53.0″ Wide x 45” Deep x 59” High (137 cm x 114 cm x 150 cm) |
| Power Requirements (voltage/frequency/current) | See the label on the left side of your machine for specific factory settings 200-240 Volts A.C., 3-phase, 50/60Hz, dedicated 30 Amps circuit recommended. 380-460 Volts A.C., 3-phase, 50/60 Hz, dedicated 20 Amps circuit recommended. |
| Current Drawn | 8 Amps (no load) at 200-240 Volts A.C., 3-phase, 50/60 Hz 5.0 Amps (no load) at 400-460 Volts A.C., 3-phase, 50/60 Hz |
| Power Cord Included | Length: 10 ft. (3 m) 12 AWG, 4 Conductor, grounded NEMA L15-30P locking plug (Four wire 250 VAC) or NEMA L16-20P locking plug (Four wire 460 VAC) |
| Ambient Operating Temperature | 40 – 100 °F (4 – 37.8°C) |
| Media Sanitization Modality | Knife Mill disintegrates media to a nominal edge length of 2mm or less. |
| Acceptable Media | SSD, USB/Flash Drive, Cell/Smart Phone, CD/DVD/BLU-RAY, Credit Card/IDs, Circuit Board. The manual feed will only accept SSDs, optical media, and other media, including small low-profile circuit boards up to the size of a 2.5” Standard form factor SSD or CD/DVD. |
| Media Sanitization Throughput | 240 SSDs per hour (avg. 1 SSD every 15 seconds) |
| Deployment/ Transportability | Floor mounted. Has built-in casters for mobility with optional leveling feet and seismic tie-downs for stability. |
| Machine Control/ Monitoring | Switch on manually. Security access, machine control, and Status via PLC touch screen. |
| Media Feeding | Autoloader with 25 SSD capacity cassette. Manual feed port for inserting one device at a time. |
| Debris Collection | Media are disintegrated in a knife mill chamber and extracted directly into an onboard HEPA Vacuum. |
| Jam/Unjam | Automatic shutdown if media jam is detected in the autoloader or the knife mill. Manual unjam and restart. |
| Safety | Completely automatic, hands-off operation. Will not operate if lock-out doors are not completely closed. The user never has to touch potentially dangerous debris. 3-Stage HEPA Filtration to meet MRV8 air quality standards. |
| |
| Technical support | On-call technical support service department; nationwide and international technical support teams can be deployed for repairs or maintenance. |
| Compliance | Global Safety and EMC Standards, Global Environmental Requirements, GMA, OSHA workplace for noise, electrical, mechanical, and airborne particle hazards. |
