| Product Name and (Model) |
MediaDice® SSD DISINTEGRATOR-2C (MDS-2C) |
| Dimensions |
45.3″ (115 cm) Wide (front left to right)
37.8″ (95 cm) Deep (front to the back of the machine)
50″ High (127 cm) Height (floor to top of the machine) |
| Weight
(excludes packing and crating) |
1250 lbs. (567 kg) |
| Shipping Weight (includes packing, crating, and pallet) |
1,500 lbs. (680 kg) |
| Shipping Dimensions |
53.0″ Wide x 45” Deep x 59” High (137 cm x 114 cm x 150 cm) |
| Power Requirements (voltage/frequency/current) |
See the label on the left side of your machine for specific factory settings
200-240 Volts A.C., 3-phase, 50/60Hz, dedicated 30 Amps circuit recommended.
380-460 Volts A.C., 3-phase, 50/60 Hz, dedicated 20 Amps circuit recommended. |
| Current Drawn |
8 Amps (no load) at 200-240 Volts A.C., 3-phase, 50/60 Hz
5.0 Amps (no load) at 400-460 Volts A.C., 3-phase, 50/60 Hz |
| Power Cord Included |
Length: 10 ft. (3 m) 12 AWG, 4 Conductor, grounded NEMA L15-30P locking plug (Four wire 250 VAC) or NEMA L16-20P locking plug (Four wire 460 VAC) |
| Ambient Operating Temperature |
40 – 100 °F (4 – 37.8°C) |
| Media Sanitization Modality |
Knife Mill disintegrates media to a nominal edge length of 2mm or less. |
| Acceptable Media |
SSD, USB/Flash Drive, Cell/Smart Phone, CD/DVD/BLU-RAY, Credit Card/IDs, Circuit Board. The manual feed will only accept SSDs, optical media, and other media, including small low-profile circuit boards up to the size of a 2.5” Standard form factor SSD or CD/DVD. |
| Media Sanitization Throughput |
240 SSDs per hour (avg. 1 SSD every 15 seconds) |
| Deployment/ Transportability |
Floor mounted. Has built-in casters for mobility with optional leveling feet and seismic tie-downs for stability. |
| Machine Control/ Monitoring |
Switch on manually.
Security access, machine control, and Status via PLC touch screen. |
| Media Feeding |
Autoloader with 25 SSD capacity cassette.
Manual feed port for inserting one device at a time. |
| Debris Collection |
Media are disintegrated in a knife mill chamber and extracted directly into an onboard HEPA Vacuum. |
| Jam/Unjam |
Automatic shutdown if media jam is detected in the autoloader or the knife mill. Manual unjam and restart. |
| Safety |
Completely automatic, hands-off operation. Will not operate if lock-out doors are not completely closed. The user never has to touch potentially dangerous debris. 3-Stage HEPA Filtration to meet MRV8 air quality standards. |
| Maintenance/ Longevity |
75,000 SSDs and other media MTBF.
Periodic replacement of vacuum bag and HEPA Filters by the user.
Periodic service by qualified service personnel approved by Phiston may be required to replace the Knife Blades, Mill Screens or re-tension the cutting mill’s drive belt. |
| Technical support |
On-call technical support service department; nationwide and international technical support teams can be deployed for repairs or maintenance. |
| Compliance |
Global Safety and EMC Standards, Global Environmental Requirements, GMA, OSHA workplace for noise, electrical, mechanical, and airborne particle hazards. |
